Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

consulted for specific requirements

HMIS

HEALTH                                                           1              REACTIVITY                                          

FLAMMABILITY                                                          PERSONAL PROTECTION                A

Identity (As Used On Label and List)

B4054  Grease Trap Blocks

Note:  Blank spaces are not permitted.  If any item is not applicable, or no  information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

 

Fairfield, CA 94534

Date Prepared

02-18-2003

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

Sodium Sulfate

7757-82-6

N/A

N/A

N/A

     

Polyethylene Glycol

25322-68-3

N/A

N/A

N/A

     

Industrial Soap

N/A

N/A

N/A

N/A

     

Bacterial Cultures/Spores

N/A

N/A

N/A

N/A

     

     

     

     

     

     

     

     

     

     

     

     

     

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

Concentrate – Initial

N/A

Specific Gravity (H2O = 1)

Concentrate

1.20

Vapor Pressure

 

N/A

Melting Point

 

~140ΊF

Vapor Density

 

None

Evaporation Rate (Butyl Acetate = 1)

 

<1

Solubility in Water

 

Complete

pH

 

     

Appearance and Odor—Solid block

VOC%

0%

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

     

N/A

N/E

N/E

Extinguishing Media – Water spray, carbon dioxide, dry chemical

Special Fire Fighting Procedures –Full protective equipment, including pressure demand self-contained breathing apparatus and turnout equipment should be worn by firefighters and others exposed to combustion by products

Unusual Fire and Explosion Hazards - None known

 

Page 2 of 2 for B4054 Grease Trap Blocks

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid –

None

Stable

X

Incompatibility (Materials to Avoid) - None Known

Hazardous Decomposition or Byproducts –Oxides of carbon when burned.

Hazardous

Polymerization

May Occur

Conditions to Avoid –

N/A

Will Not Occur

X

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

No

Inhalation?

No

Skin?

No

Ingestion?

Health Hazards (Acute and Chronic) –

None Known

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

Not listed

Not listed

Not listed

Not listed

Signs and symptoms of Exposure:

Eyes & Skin— May cause irritation

Ingestion— May cause nausea, abdominal pain, diarrhea, and vomiting.

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures:

Eyes— Remove contact lens. Flush with water for 15 minutes. Contact a physician if irritation persists

Skin— Wash affected area with soap and water

Ingestion— DO NOT induce vomiting. Call a physician

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –

None

Waste Disposal Method –Dispose only in accordance with applicable federal, state and local laws and regulations

Precautions to be Taken in Handling and Storing –

None

Other Precautions –Always practice good housekeeping and hygienic measures.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

 

Ventilation

Local Exhaust

N/A

Special

N/A

Mechanical (General)

N/A

Other

N/A

Protective Gloves –

None

Eye Protection -

None

Other protective Clothing or Equipment –None

Work/Hygienic Practices - Wash thoroughly with soap and water after coming in contact with product

 

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.