Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                   1        REACTIVITY                               0

FLAMMABILITY                                     0      PROTECTION                               B

Identity (As Used On Label and List)

Q2016  Rust X    Q

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

05-21-2008

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

Tannic Acid

1401-55-4

N/E

N/E

 

 

2-Butoxyethanol*

111-76-2

25 ppm (skin)

25 ppm (skin)

 

 

Oxalic Acid

144-62-7

1 mg/m3

1 mg/m3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

     

     

     

     

     

     

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 372.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

 

N/D

Specific Gravity (H2O = 1)

Concentrate

1.06

Vapor Pressure

 

N/D

Melting Point

 

N/A

Vapor Density (Air=1)

 

N/D

Evaporation Rate (Butyl Acetate = 1)

 

N/D

Solubility in Water

 

Soluble

pH

 

1.5 – 2.5

Appearance and Odor—Beige, opaque emulsion: bland odor.

VOC Content (% by weight)

 

<4.0

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Non Flammable

Closed cup

N/D

N/D

Extinguishing Media – Foam, CO2, dry chemical, water..

Special Fire Fighting Procedures –Cool drums in vicinity of fire with water fog.  Fire fighters should be equipped with full protective gear including self-contained breathing apparatus.

Fire and Explosion Hazards – None.

 


Page 2 of 2 for Q2016 Rust X Q

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid

None

Hazardous

Polymerization

May Occur

Stable

X

Will Not Occur

X

Incompatibility (Materials to Avoid) – Oxidizers, strong alkalis.

Hazardous Decomposition or Byproducts –Thermal decomposition may produce oxides of carbon.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic)

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

No

No

No

Signs and Symptoms of Exposure:

Eyes— Moderate irritation and redness.

Skin—Prolonged or repeated exposure can lead to mild irritation, formation of dark colored stains..

Inhalation— May cause respiratory tract irritation, headache, nausea.

Ingestion—Gastrointestinal irritation, nausea, cramps, and vomiting.  May be harmful or fatal if swallowed.

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures. 

Eyes—Flush eyes and under eyelids with plenty of cool water for at least 15 minutes.  If irritation persists, obtain medical attention.

Skin—Wash with soap and water.  Remove contaminated clothing and launder separately before reuse.  If irritation persists, obtain medical attention.

Inhalation—Remove to fresh air. 

Ingestion—Contact physician or poison center immediately.  Rinse mouth with water and give person 1 to 2 glasses of water.  Never give anything by mouth to an unconscious person.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Ventilate area.  Contain spill.  Soak up spilled material with inert absorbent material and place in properly labeled container for disposal.

Waste Disposal Method – Consult local environmental authorities.

Precautions to be Taken in Handling and Storing –

Store in a cool dry area.  Do not freeze.  Keep container tightly closed when not in use.

Other Precautions –KEEP OUT OF REACH OF CHILDREN.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

Use with adequate ventilation.  If recommended exposure limits are exceeded wear a NIOSH approved respirator.

Ventilation

Local Exhaust

Recommended

Special

 

Mechanical (General)

Not Required

Other

 

Protective Gloves –

Chemical resistant gloves

Eye Protection –

Safety glasses or chemical goggles.

Other protective Clothing or Equipment – Eye wash station.

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.