Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 2 REACTIVITY 0

FLAMMABILITY 0 PERSONAL PROTECTION A

Identity (As Used On Label and List)

B4138 Rough Man

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date prepared

01-01-2007

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

D’ Limonene

5989-27-5

N/E

Dimethyl Glutarate

1119-40-0

N/E

Dimethyl Adipate

627-93-0

N/E

Dimethyl Succinate

106-65-0

N/E

Sodium Octanesulfonate

5324-84-5

N/E

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

>212ºF

Specific Gravity (H₂O = 1)

Concentrate

1.0

Vapor Pressure

N/E

Total VOC

Vapor Density (Air=1)

N/E

Evaporation Rate (Butyl Acetate = 1)

N/A

Solubility in Water

Complete

pH Concentrate

6.2

Appearance and Odor— Orange cloth saturated with citrus-scented liquid.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

N/A

Extinguishing Media –Use appropriate methods for combating surrounding fire.

Fire Fighting Methods –Wear a self-contained breathing apparatus with a full-face piece operated in the positive pressure demand mode.

Fire and Explosion Hazards – N/A.

Page 2 of 2 for B4138 Rough Man

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

High temperatures

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) - Strong acids, oxidizers

Hazardous Combustion Products – CO, CO₂.

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

yes

Health Hazards (Acute and Chronic) –

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

Signs and Symptoms of Exposure:

Eyes—May cause irritation.

Skin—May cause mild irritation. Prolonged and repeated contact may dry skin and cause irritation and sensitization.

Inhalation— Excessive exposure may cause headaches.

Ingestion—May cause gastrointestinal upset. Aspiration into the lungs may occur during ingestion or vomiting, resulting in lung injury.

Medical Conditions Generally Aggravated –Prolonged and repeated contact with skin can cause defatting and drying of the skin which may result in skin irritation and dermatitis. Contact may cause sensitization, eye disorders, skin disorder, upper respiratory disorders.

Emergency and First Aid Procedures.

Eyes—Immediately flush eyes with plenty of water for at least 15 minutes while holding eyelids open. Get immediate medical attention.

Skin—Flush skin with plenty of water.

Inhalation—No specific treatment necessary since this material is not likely to be hazardous by inhalation.

Ingestion—If swallowed, call a physician immediately. DO NOT induce vomiting unless directed to do so by a physician. Never give anything by mouth to an unconscious person. If vomiting occurs spontaneously, keep head below hips to prevent aspiration of liquid into the lungs.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Absorb spill with inert material. Flush area will with water to remove trace residue. Surfaces may become slippery after spillage.

Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

Store in a cool, dry area. Keep from freezing.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

None

Ventilation

Local Exhaust

N/A

Special

None

Mechanical (General)

Adequate

Other

None

Protective Gloves –

None

Eye Protection –

None

Other protective Clothing or Equipment – Eye wash station recommended.

Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.