Material Safety Data Sheet May be used to Comply with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be Consulted for specific requirements

HMIS

HEALTH 0 REACTIVITY 0

FLAMMABILITY 0 CORROSIVE 0

Identity (As Used On Label and List) G3038P Q & E

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for: OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number: 1-800-424-9300

Address (Number, Street, City, State, and Zip Code) 101 Grobric Ct #1

Telephone Number for Information: 1-800-571-7347

Fairfield, CA 94534

Date Prepared 05-24-2004

Signature of Prepare (Optional) REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components (Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits Recommended.

%(Wt.)

None

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

Decomposes

Specific Gravity (H2O = 1) Concentrate

2.6

Vapor Pressure

N/A

VOC (grams per liter)

N/D

Vapor Density (Air=1)

N/A

Evaporation Rate (Butyl Acetate = 1)

Solubility in Water

N/A

pH

Appearance and Odor— Gray cement color.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Non Combustible

N/A

N/A

Extinguishing Media – Foam dry chemical, CO2.

Fire Fighting Equipment – At elevated temperatures (above 120º) containers may vent, rupture, or burst.

Fire and Explosion Hazards – Keep containers cool. Use equipment of shielding required protecting personnel against bursting, rupturing, venting containers.

Page 2 of 2 for G3038P Q & E

Section V – Reactivity Data
Stability	Unstable				Conditions to Avoid – None
	Stable			X
Incompatibility (Materials to Avoid) – Strong oxidizing agents.
Hazardous Decomposition or Byproducts –Sulfur dioxide, hydrogen sulfide, nitrous oxides and ammoniac vapors.
Hazardous Polymerization	May Occur				Conditions to Avoid – None
	Will Not Occur			X
Section VI – Health Hazard Data
Route(s) of Entry:	Eyes? Yes				Inhalation? Yes			Skin? Yes			Ingestion? Yes
Health Hazards (Acute and Chronic) – See Below
Carcinogenicity:			NTP?			IARC Monographs?				OSHA Regulated?
			N/A			N/A				N/A
Signs and Symptoms of Exposure: Eyes—Contact will be painful and irritating. Skin—Prolonged or repeated contact with skin may cause irritation. Inhalation— Mist caused by manufacturing operations may irritate the nasal passages.
Medical Conditions Generally Aggravated –None Known
Emergency and First Aid Procedures. Eyes—Flush with water for at least 15 minutes. Skin—Wash with soap and water. Inhalation—Remove to fresh air. See a physician if irritation persist. Ingestion—Call physician. Do not induce vomiting.
Section VII – Precautions For Safe Handling and Use
Steps to be Taken in Case Material is Released or Spilled - Pick up free material for recycle/disposal.
Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.
Precautions to be Taken in Handling and Storing – Store in a cool, dry, well-ventilated place away from incompatible materials. Keep container tightly closed when not in use. Do not use pressure to empty container. Wash thoroughly after handling. Do not get in eyes, on skin, or on clothing. Store in original containers only at temperatures below 85ºF. Do not store near acids, oxidizable materials, organics.
Other Precautions – Containers even those that have been emptied will retain product residue and vapors. Always obey hazard warnings and handle empty containers as if they were full. Do not mix this product with other cleaning agents. It is a violation of federal law to use this product in a manner inconsistent with its labeling.
Special Precautions –Minimal-handling temperature should be maintained. Do not ingest.
Section VIII – Control Measures
Respiratory Protection (Specify Type) – When applicable, wear a NIOSH approved respirators appropriate for the vapor or mist concentration at the point of use.
Ventilation		Local Exhaust			Adequate				Special
		Mechanical (General)							Other
Protective Gloves – Neoprene or nitrile rubber gloves recommended.							Eye Protection – Safety glasses.
Other protective Clothing or Equipment – None
Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.