Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 0 ACUTE 0

FLAMMABILITY 0 PERSONAL PROTECTION

Identity (As Used On Label and List)

B4144 Protector Tubes

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

06-04-2002

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

None

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

N/A

Specific Gravity (H₂O = 1)

Concentrate

1.0

Vapor Pressure

N/A

Melting/Freezing Point

N/A

Vapor Density (Air=1)

N/A

Evaporation Rate (Butyl Acetate = 1)

N/A

Solubility in Water

Low

VOC

N/A

7.5

Viscosity

30,000 cps

Appearance and Odor— White lotion w/ coppertone odor.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

N/A

Extinguishing Media – Foam, CO₂, water spray, dry chemical.

Protection— As in any fire wear self-contained breathing apparatus pressure demand, (MSHA/ NIOSH approved or equivalent) and full protective gear.

Special Fire Fighting Procedures –None

Unusual Fire and Explosion Hazards – None

Page 2 of 2 for B4144 Protector Tubes

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

None

Stable

Incompatibility (Materials to Avoid) – None

Hazardous Decomposition or Byproducts –None

Hazardous

Polymerization

May Occur

Conditions to Avoid –

None

Will Not Occur

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Inhalation?

No

Skin?

No

Ingestion?

No

Health Hazards (Acute and Chronic) –

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

Signs and Symptoms of Exposure:

Eyes—No harmful effects have been reported upon contact with eyes.

Skin— No harmful effects have been reported upon contact with skin

Inhalation— No harmful effects have been reported upon contact with inhalation.

Ingestion— No harmful effects have been reported upon contact with ingestion.

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures.

Eyes—Immediately flush eyes with plenty of water. Get medical attention, if irritation persists.

Skin Irritation—Immediately and thoroughly wash off with soap and water.

Inhalation—N/A

Ingestion— If swallowed seek medical attention.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –

No special requirement for spills or leaks.

Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

No special requirement for handling procedures.

Store in a dry location.

Other Precautions –None

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

Not required

Ventilation

Local Exhaust

Not required

Special

Mechanical (General)

Not required

Other

Protective Gloves –

Not required

Eye Protection –

Not required

Other protective Clothing or Equipment – Not required

Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.