Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                   0        REACTIVITY                               0

FLAMMABILITY                                     0      PERSONAL PROTECTION          N/A

Identity (As Used On Label and List)

B5101 Plug It

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

03-02-2006

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

Bentonite Blend

1302-78-9

 

 

 

40-60

Acrylic Polymer

603 23-79-7

 

 

 

0.1-1.0

Diatomite

68855-54-9

 

 

 

0.1-1.0

Polyethylene Glycol

25322-68-3

 

 

 

<0.001

Dow 75 Preservative

 

 

 

 

 

1-(3-Chloroallyl)-3,5,7- trianza-1-

 

 

 

 

 

azoniaadamantane

 

 

 

 

 

Chloride

004080-31-3

 

 

 

<0.0007

Sodium bicarbonate

000144-55-8

 

 

 

<0.0004

Hexamethylenetetramine

000100-97-0

 

 

 

<0.00002

Water

007732-18-5

 

 

 

40-60

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III

Section 313

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

 

N/A

Specific Gravity (H2O = 1)

Concentrate

1.4

Vapor Pressure (mm/hg)

 

N/A

Melting Point

 

N/A

Vapor Density (Air=1)

 

N/A

Evaporation Rate (Butyl Acetate = 1)

 

N/A

Solubility in Water

 

Negligible

pH

 

N/A

Appearance and Odor—Gray heavy paste-like consistency, odorless.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Non Flammable

N/A

N/A

N/A

Extinguishing Media – N/A

Special Fire Fighting Procedures – Non Flammable

Unusual Fire and Explosion Hazards – N/A

 


Page 2 of 2 for    B5101 Plug It

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid

None known.

Hazardous

Polymerization

May Occur

Stable

X

Will Not Occur

X

Incompatibility (Materials to Avoid) – None known.

Hazardous Decomposition or Byproducts – None known.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes? 

Yes

Inhalation?

Unlikely

Skin?

No

Ingestion?

Unlikely

Health Hazards (Acute and Chronic)

N/A

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

N/A

N/A

N/A

Signs and Symptoms of Exposure:

N/A

Medical Conditions Generally Aggravated –

Emergency and First Aid Procedures. 

Eyes—Flush the eyes immediately with large amounts of water.  If irritation persists, get immediate medical attention.

Skin—Wash off with soap and water.

Inhalation—Unlikely.  If a piece should get into the nasal passage, get immediate medical attention to remove it.

Ingestion— N/A

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Shovel or scoop up the material.  Avoid adding water, as the product can be slippery when wet.

Waste Disposal Method – Uncontaminated material may be allowed in the solid waste, but check with your local regulatory agency first.  If used to plug or stop a chemical leak, then dispose of according to the regulations for that chemical.

Precautions to be Taken in Handling and Storing –

N/A

Other Precautions – KEEP OUT OF REACH OF CHILDREN.  The material can be slippery.  Take necessary precautions.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

N/A

Ventilation

Local Exhaust

Adequate

Special

 

Mechanical (General)

 

Other

 

Protective Gloves –

Recommended

Eye Protection –

Safety glasses or goggles are recommended.

Other protective Clothing or Equipment – N/A

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc. Do not smoke while using.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.