Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                   1        REACTIVITY                               0

FLAMMABILITY                                     0         PERSONAL PROTECTION       B

Identity (As Used On Label and List)

A1238 M.G.C

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

06-06-2008

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

Liquefied Petroleum Gas

68476-86-8

1000 ppm

1000 ppm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III

Section 313

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

 

212ºF

Specific Gravity (H2O = 1) @ 70ºF

Concentrate

1.00

Vapor Pressure (can:psig @ 72ºF)

 

55 psig

VOC%

 

6.71%

Vapor Density (Air=1)

 

>1

Evaporation Rate (Butyl Acetate = 1)

 

 

Solubility in Water

 

Complete

pH

 

9.2

Appearance and Odor— White foam with fresh fragrance.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Non Flammable

None to Boiling

N/A

N/A

Extinguishing Media – Foam, CO2, dry media.

Special Fire Fighting Procedures – Wear self-contained breathing apparatus and protective clothing.  Cool fire exposed containers to prevent rupturing.

Unusual Fire and Explosion Hazards – Exposure to temperature above 120ºF may cause bursting.

 

Page 2 of 2 for    A1238 M.G.C

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid –

N/A

Hazardous

Polymerization

May Occur

Stable

x

Will Not Occur

x

Incompatibility (Materials to Avoid) –  Strong oxidizing agents.

Hazardous Decomposition or Byproducts –.Carbon dioxide, carbon monoixeds.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes? 

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic) –

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

No

No

Signs and Symptoms of Exposure:

Eyes— May cause moderate irritation.

Skin—Frequent or prolonged contact may cause irritation.  May aggravate existing skin conditions.

Inhalation—Inhalation of mist can cause irritation of nasal and respiratory passages.  Abusive or excessive inhalation may cause irritation to the upper respiratory tract, dizziness, nausea and other central nervous system effects.

Ingestion—.Can cause gastrointestinal irritation, nausea, vomiting, and diarrhea.  Aspiration of material into the lungs may cause pulmonary injury.

Medical Conditions Generally Aggravated –N/A

Emergency and First Aid Procedures. 

Eyes— Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open.  If irritation persists get medical attention immediately.

Skin— Wash with soap and water.  If irritation persists seek medical attention.

Inhalation— Remove to fresh air.  Seek medical attention immediately.  If breathing stops give artificial respiration.

Ingestion— Do not induce vomiting.  Seek medical attention immediately.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Allow propellant to evaporate.  Maintain local exhaust and adequate ventilation.  No smoking.  Keep sparks, heat sources and open flame far away from spill or leak.  Cover with absorbent material and sweep up.  Wash area to prevent slipping.  Dispose of soaked absorbent material in accordance with Federal, State and local laws.

Waste Disposal Method –.Aerosol cans, when emptied and depressurized through normal use, pose no disposal hazard and should be recycled.  Consult Federal, State and local authorities for approved procedures.

Precautions to be Taken in Handling and Storing –

Store in a cool, dry area away from heat or open flame.   Do not store at temperatures above 120ºF.

Other Precautions – KEEP OUT OF REACH OF CHILDREN

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

 None needed for proper use in accordance with label directions.

Ventilation

Local Exhaust

Adequate

Special

 

Mechanical (General)

 

Other

 

Protective Gloves –

Use chemical resistant gloves if hand contact will be made.

Eye Protection – Always wear safety glasses or chemical proof goggles when working with chemicals.

Other protective Clothing or Equipment –N/A

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc. Do not smoke while using.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.