Material Safety Data Sheet May be used to Comply with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be Consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY 0

FLAMMABILITY 1 PERSONAL PROTECTION -

Identity (As Used On Label and List) B4027W Grease It WHITE

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for: OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number: 1-800-424-9300

Address (Number, Street, City, State, and Zip Code) 101 Grobric Ct #1

Telephone Number for Information: 1-800-571-7347

Fairfield, CA 94534

Date Prepared 08-25-2010

Signature of Prepare (Optional) REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components (Specific Chemical Identity, Common Name(s))

CAS No.

PEL (mg/M3)

TLV (mg/M3)

Other Limits

%(Wt.)

Petroleum Oil

64742-54-7

10 (as oil mist)

10 (as oil mist)

80-90

Performance package

Mixture

N/E

N/E

10-20

The specific chemical names and composition of the components not disclosed is confidential business information and is withheld.

as permitted by 29CFR 1910.1200 and various Right-to-know laws. This product is not a WHMIS controlled substance

Section III - Physical Chemical Characteristics

Boiling Point

N/E

Specific Gravity (H2O = 1) @ 75ºC Concentrate

—

Vapor Pressure (mm/hg) @ 25°C

<1 mm

Relative Density @ 15°C

0.89

Vapor Density (Air=1)

< 1 mm

Evaporation Rate (Butyl Acetate = 1)

N/E

Solubility in Water

Slight

pH

N/E

Appearance and Odor— White, smooth semi-solid grease with slight petroleum odor.

VOC%

—

Section IV – Fire and Explosion Hazard Data

Flash Point (Cleveland Open Cup)

Flammable Limits (Approx. Vol. % in Air)

LEL

UEL

455°F

N/A

N/A

Extinguishing Media – Water spray (fog), dry chemical, foam, halon, or carbon dioxide.

Inappropriate Extinguishing Media — Water steam may splash burning liquid and spread fire.

Fire Fighting Procedures –Evacuate area. Prevent runoff from fire control or dilution from entering streams, sewers or drinking water supply. Fire fighters should use self-contained breathing apparatus (SCBA) to fight fires. Use water spray to cool fire exposed surfaces and to protect personnel.

Hazardous Combustion Products– Smoke, Fume, Sulfur oxides, oxides of carbon.

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid – Excessive heat. Sources of ignition.

Hazardous Polymerization

May Occur

Stable

X

Will Not Occur

X

Page 2 of 2 for B4027W Grease It WHITE

Incompatibility (Materials to Avoid) – Strong oxidizing agents, heat, open flame.
Hazardous Decomposition or Byproducts –Does not decompose at ambient temperatures.
Section VI – Health Hazard Data
Route(s) of Entry:		Eyes? —	Inhalation? Yes		Skin? Yes	Ingestion? —
Health Hazards (Acute and Chronic) – Acute: Skin & Eyes: This product is not a primary skin irritant after exposure of short duration, is not a skin sensitizer and is not irritating to the eyes. Chronic: Prolonged and repeated contact with skin can cause defatting and drying of the skin resulting in skin irritation and dermatitis. Long term intensive exposure to oil mist may cause benign lung fibrosis. The following ingredient are cited on the lists below: None NTP CARC, NTOP SUS, IARC 1, IARC 2A, IARC 2B, OSHA CARC. This material is not known to contain any chemical listed as a carcinogen or suspected carcinogen by OSHA hazard Communication Standard 29CFR 1910.1200, IARC, or the National Toxicology Program (NTP) at a concentration greater than 0.1%.
Signs and Symptoms of Exposure: Exposure will most likely occur through skin contact or form inhalation of mechanically or thermally generated oil mists.
Emergency and First Aid Procedures. Eyes—Immediately flush with large quantities of cool water for at least 15 minutes. Get medical attention. Skin— Wash off with soap and water. Inhalation— Remove to fresh air. If not breathing, give artificial respiration. Get medical attention. Ingestion— Do NOT induce vomiting. Get medical attention.
Section VII – Precautions For Safe Handling and Use
Steps to be Taken in Case Material is Released or Spilled. Contain any spills with absorbents to prevent migrations and entry into sewers or streams. Take up small spills with dry chemical absorbent. Large spills may be taken up with pump or vacuum and finished off with dry chemical absorbent. May require excavation of contaminated soil. Land Spill: Contain any spills with absorbents to prevent migrations and entry into sewers or steams. Take up small spills with dry chemical absorbent. Large spills may be taken up with pump or vacuum and finished off with dry chemical absorbent. May require excavation of contaminated soil. Water Spill: Confine the spill immediately with booms. Stop leak, if you can do so without risking personal safety. Report spills as required to appropriate authorities. Remove form the surface by skimming or with suitable absorbents. Environmental Precautions: Large spills should be diked for later recovery or disposal. Spills may be taken up with pump or vacuum and finished off with dry chemical absorbent. May require excavation of contaminated soil. To the best Omega Industrial Supply Inc., this product is not regulated by CERCLA/RCRA as a hazardous waste in a manner acceptable to good waste management practice and in compliance with applicable local, state and federal regulations.
Disposal Information – Disposal recommendations based on material as supplied. Therefore, it may be disposed of as an industrial waste in a manner acceptable to good waste management practice and in compliance with applicable local, state and federal regulations.
Precautions to be Taken in Handling and Storing – Handling: Avoid contact with skin. Prevent spills and leaks to avoid slipping hazards. Storage: Keep containers sealed until ready for use. Avoid excessive long-term storage temperatures to prolong shelf life. Maximum storage temperature; 120°F. Store in well ventilated areas.
Section VIII – Control Measures
Personal Protection — Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation. Information on the selection of protective equipment for use with this material, as provided below is based upon intended, normal usage.
Respiratory Protection (Specify Type) – None required in normal use. Use only NIOSH/MSHA Organic vapor approved equipment if necessary.
Ventilation	The level pf protection and types of control necessary will vary depending upon potential exposure conditions. Under normal conditions, no special control required when used in a well-ventilated area with local exhaust ventilation.
Protective Gloves –Chemical resistant gloves are recommended. No protection is required in normal use.				Eye Protection – Goggles or safety glasses with side shields are recommended.
Other protective Clothing or Equipment – Chemical/oil resistant clothing if contact with material is likely. No skin protection is ordinarily reuired under normal conditions of use.
Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.