Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                   1        REACTIVITY                               0

FLAMMABILITY                                     1      PERSONAL PROTECTION          B

Identity (As Used On Label and List)

A1087 Total

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

03-19-2007

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

 

Other Limits

%(Wt.)

Isobutane/ Propane Blend

75-28-5

800 ppm

800 ppm

 

 

 

74-98-6

1000 ppm

1000 ppm

 

 

Mineral Oil

8042-47-5

5mg/m3

5mg/m3

 

 

 

 

 

 

 

 

     

     

     

     

     

     

 

     

     

     

     

     

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

 

N/A

Specific Gravity (H2O = 1)

Concentrate Only

0.963

Vapor Pressure (psig @ 70ºF)

 

max 60

Melting Point

 

N/A

Vapor Density (Air=1)

 

N/E

Evaporation Rate (Butyl Acetate = 1)

 

N/E

Solubility in Water

 

Soluble

pH

 

N/A

Appearance and Odor—

Yellowish foam with fresh fragrance.

VOC %

 

6.1

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Not-Flammable

N/E

N/E

N/E

Extinguishing Media – Foam, CO2, water, dry chemical.

Special Fire Fighting Procedures –Wear self-contained breathing apparatus. 

Unusual Fire and Explosion Hazards – Do not expose aerosols to temperatures above 130ºF or the container may rupture.

 


Page 2 of 2 for A1087 Total

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid – High temperatures 130ºF

Open flame, welding arcs heat

Hazardous

Polymerization

May Occur

Stable

X

Will Not Occur

X

Incompatibility (Materials to Avoid) – Strong oxidizers.

Hazardous Decomposition or Byproducts – Carbon monoxide, carbon dioxide.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic)

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

N/L

N/L

N/L

Signs and Symptoms of Exposure:

Eyes—Mild irritation.

Skin—May aggravate existing skin conditions

Inhalation—Excessive inhalation of vapors can be harmful and may cause headache, dizziness, asphyxia, anesthetic effects and possible unconsciousness.

Ingestion—Possible chemical pneumonia if aspirated into lungs, nausea.

Medical Conditions Generally Aggravated –May aggravate existing eye, skin or upper respiratory conditions.

Emergency and First Aid Procedures. 

Eyes—Flush with water for at least 15 minutes.  If irritated seek medical attention.

Skin—Wash with soap and water.  If irritated seek medical attention.

Inhalation—Remove to fresh air.  Resuscitate if necessary.  Get medical attention.

Ingestion—Do not induce vomiting.  Drink two large glasses of water.  Get immediate medical attention.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Absorb spilled liquid with suitable medium.  Place in closed drum for proper disposal.  Incinerate or landfill according to local, state or federal regulations.  DO NOT FLUSH LIQUID TO SEWER.

Waste Disposal Method Aerosol cans, when vented to atmospheric pressure through normal use, pose no disposal hazard.

Precautions to be Taken in Handling and Storing –

Do not puncture or incinerate containers.  Do not store at temperature above 130ºF.

Other Precautions –KEEP OUT OF REACH OF CHILDREN.  Avoid food contamination.  Avoid breathing vapors.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

If vapor concentration exceed TLV use respirator approved by NIOSH in a positive pressure mode.

Ventilation

Local Exhaust

Adequate

Special

 

Mechanical (General)

Adequate

Other

Adequate

Protective Gloves –

Latex, if skin is easily irritated.

Eye Protection –

Safety glasses recommended

Other protective Clothing or Equipment – None

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.