Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY 0

FLAMMABILITY 3 PERSONAL PROTECTION A

Identity (As Used On Label and List)

A1039 Super Mend

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

10-20-2010

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended

Acetone

67-64-1

1000 ppm

500 ppm

20-30

Hexane*

110-54-3

500 ppm

50 ppm

20-30

Propane*

74-98-6

1000 ppm

N/A

25-35

This product contains the toxic chemicals marked with an * subject to the reporting requirements of Section 313 of the Emergency

Planning and Community Right-To-Know Act of 1986 and of 40CFR372.

Section III - Physical Chemical Characteristics

Boiling Point

>104ºF

Specific Gravity (H₂O = 1)

Concentrate

0.81

Vapor Pressure (mmHg)

300

Melting Point

N/A

Vapor Density (Air=1)

Evaporation Rate (Butyl Acetate = 1)

Solubility in Water

20%

Appearance and Odor—Straw colored spray, solvent odor.

VOC%

55%

Section IV – Fire and Explosion Hazard Data

Flash Point (TCC)

Flammable Limits

LEL

UEL

<20ºF

N/E

Extinguishing Media –Dry chemical, alcohol foam and CO2.

Special Fire Fighting Procedures –self-contained breathing apparatus is always recommended when fighting fires.

Unusual Fire and Explosion Hazards – Extremely flammable. Contents under pressure. Exposure to temperatures above 120°F may cause bursting. Vapors can be flammable and flow along surfaces to distant igniton.

Page 2 of 2 for A1039 Super Mend

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

Temperatures >120ºF

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) – May affect certain plastics.

Hazardous Decomposition or Byproducts –None

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

—

Inhalation?

Skin?

Ingestion?

No

Health Hazards (Acute and Chronic) –

Eyes: Strong irritation, reddening.

Skin: Will irritate if left untreated, possibly causing dermatitis

Inhalation: Excessive exposure may cause dizziness, headache, sickness.

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

Signs and Symptoms of Exposure:

See Health Hazards Above

Medical Conditions Generally Aggravated – Excessive exposure will aggravate respiratory, cardiovascular or pulmonary illnesses.

Emergency and First Aid Procedures.

Eyes—Flush with water for 15 minutes. Contact physician.

Skin— Wash with soap and water, a solvent wash may be used if necessary. Contact physician if irritation persists.

Inhalation— Remove to fresh air and contact physician.

Ingestion— N/A

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –

Wipe up with rag or use some absorbent clay material and allow area to dry. Excess may be removed after drying with sandpaper or other scraping device.

Waste Disposal Method –Dispose of residue in accordance with federal, state and local guidelines. Do not puncture or incinerate container. Do not reuse container. Wrap container and place in trash collection.

Precautions to be Taken in Handling and Storing –

Store in a cool dry area. Do not use or store near heat or open flame. Exposrue to temperatures avove 120°F may cause bursting.

Other Precautions –None

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

Use only in well ventilated area.

Ventilation

Local Exhaust

Adequate

Special

N/A

Mechanical (General)

N/A

Other

N/A

Protective Gloves–

N/A

Eye Protection –

Safety glasses are recommended when using chemicals products.

Other protective Clothing or Equipment – N/A

Work/Hygienic Practices - Normal. Wash thoroughly before eating, drinking, smoking, using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.