Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY

FLAMMABILITY 1 PERSONAL PROTECTION N/A

Identity (As Used On Label and List)

B4035 Soy Wipes

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

02-04-2011

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended

%(Opt.)

Methyl Soyate (soybean oil ester)

68990-52-3

N/E

N/A

Ethyl Lactate

97-64-3

N/E

N/A

Propylene Glycol T-butyl Ether

57018-52-7

N/E

N/A

D-Limonene

5989-27-5

N/E

N/A

Section III - Physical Chemical Characteristics

Boiling Point

Concentrate – Initial

200ºC

Specific Gravity (H₂O = 1)

Concentrate

0.940

Vapor Pressure @ 20ºC

Melting Point

N/A

Vapor Density

3.4

Evaporation Rate (Butyl Acetate = 1)

Solubility in Water

Emulsifies with water

Appearance and Odor—

Clear, pale yellow liquid with a cherry scent.

VOC%

31%

Section IV – Fire and Explosion Hazard Data

Flash Point

Flammable Limits

LEL

UEL

200°F TOC Combustible

Not Determined

Extinguishing Media – Use water fog, foam, CO₂ or dry chemical.

Special Fire Fighting Procedures –Firefighters should be equipped with self-contained breathing apparatus and turnout gear.

Unusual Fire and Explosion Hazards – Low, when exposed to heat or flames. Can react with oxidizing materials.

Page 2 of 2 for B4035 Soy Wipes

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

Moisture-compound is hygroscopic

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) – Strong acids and oxidizing agents

Hazardous Decomposition or Byproducts –Carbon monoxide, carbon dioxide, nitrous oxide.

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Inhalation?

Skin?

Ingestion?

Health Hazards (Acute and Chronic) –

Acute:

Eyes—Can cause irritation.

Skin—Can cause irritation.

Ingestion—May cause gastric disturbances.

Inhalation—None known

Chronic: None

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

Signs and Symptoms of Exposure:

Eye and skin irritation

Medical Conditions Generally Aggravated –None known

Emergency and First Aid Procedures.

Eyes— Immediately wash with water for 15 minutes. If irritation develops, get medical attention.

Skin—Wash affected areas with soap and water. Remove and launder contaminated clothing before reuse. If irritation develops. Get medical attention.

Ingestion—Dilute with water and immediately induce vomiting. Get immediate medical attention.

Inhalation—Remove to fresh air

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –.

Ventilate area. Absorb with clay-type absorbent and sweep to containment area.

Waste Disposal Method – In accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

Keep container closed when not in use. Store away from extremes in temperature

Other Precautions— KEEP AWAY FROM CHILDREN

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

None required under normal use.

Ventilation

Local Exhaust

Satisfactory

Special

N/A

Mechanical (General)

Only if local is inadequate

Other

N/A

Protective Gloves –

None required.

Eye Protection –

None required.

Other protective Clothing or Equipment – None.

Work/Hygienic Practices - Normal. Wash thoroughly before eating, drinking, smoking, using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.