Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY

FLAMMABILITY 3 PERSONAL PROTECTION A

Identity (As Used On Label and List)

B4059 Sani Wipe Tubs

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

01-01-2007

Signature of Prepare (Optional)

Regulatory Dept.

Section II –Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Wt.)

Ethanol

64-17-5

1000 ppm

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

>150ºF

Specific Gravity (H₂O = 1) 77ºF

Concentrate

0.9

Vapor Pressure

N/E

VOC Content by Weight

70%

Vapor Density

N/E

Evaporation Rate (Butyl Acetate = 1)

N/E

Solubility in Water

Complete

N/A

Appearance and Odor—White liquid with alcohol odor- impregnated cloth.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Flammable

80ºF (T.O.C method)

N/E

Extinguishing Media – Foam, CO₂, dry media or water spray recommended..

Special Fire Fighting Procedures – Wear a self-contained breathing apparatus with a full-face piece operated in the positive pressure demand mode. Chemical resistant PPE is recommended.

Unusual Fire and Explosion Hazards – None

Page 2 of 2 for B4059 Sani Wipe Tubs

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

High temperatures

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) - Strong acids and strong oxidizing agents.

Hazardous Decomposition or Byproducts – Carbon monoxide, carbon dioxide.

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Inhalation?

Skin?

Ingestion?

Health Hazards (Acute and Chronic) –

Acute:

Eyes— Causes irritation experienced a stinging discomfort, pain, tearing or redness.

Skin— Prolonged and continuous exposure may cause defatting and drying of skin.

Inhalation—Vapor may cause irritation of the respiratory tract. Avoid inhalation of concentrated vapors.

Ingestion— May cause dizziness, faintness, drowsiness, decreased awareness and responsiveness, lack of coordination, abdominal discomfort, nausea, vomiting and diarrhea.

Chronic/Long term effects: Repeated or prolonged exposure to ethanol can be irritation to mucosal membranes.

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

Signs and Symptoms of Overexposure:

Prolonged or repeated skin exposure may cause defatting of skin. Overexposure by inhalation may cause headache, nausea, dizziness and even loss of consciousness.

Medical Conditions Generally Aggravated – None Known

Emergency and First Aid Procedures.

Eyes— Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.

Skin— Rinse with water.

Inhalation— Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Ingestion— Seek medical attention immediately. Call a poison control center or doctor for treatment advice. Have person sip a glass of water if able to swallow. Never give anything by mouth to an unconscious person.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –

Stop all leaks. Isolate hazard area. Keep unnecessary and unprotected personnel from entering. Absorb spill with inert material (e.g. dry sand, earth). Eliminate all ignition sources. Prevent runoff from entering drain, sewers, streams or other bodies of water. Absorb unrecoverable product. Transfer contaminated absorbent, soil and other materials to containers for disposal.

Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

Follow all MSDS/label precautions even after container is emptied because they may container product residues. Use with adequate ventilation. Store in a cool, dry place. Keep container closed when not in use.

Other Precautions – KEEP OUT OF REACH OF CHILDREN.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

When respiratory protection is required use an organic vapor cartridge. A respiratory program that meets OSHA’s 29 CFR 1910.34 & ANSI Z88.2 requirements must be followed.

Ventilation

Local Exhaust

Special

Mechanical (General)

Adequate

Other

Protective Gloves –For continuous occupational exposure wear impervious gloves (made from rubber, nitrile or neoprene).

Eye Protection –

Wear safety glasses with side shields or goggles.

Other protective Clothing or Equipment – None

Work/Hygienic Practices - Normal. Wash thoroughly before eating, drinking, smoking, using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.