Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                   0        REACTIVITY                               0

FLAMMABILITY                                     3      PERSONAL PROTECTION          N/A

Identity (As Used On Label and List)

B4150  Protector Tubs

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address Number,

 101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

04-02-2009

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

Ethyl Alcohol

64-17-5

1000 ppm

1000 ppm

 

 

 

 

 

 

 

 

 

 

 

 

     

     

     

     

     

     

     

     

     

     

 

     

     

     

     

     

     

     

     

     

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point (ºF)

 

N/D

Specific Gravity (H2O = 1)

Concentrate

0.87*

Vapor Pressure (mm/hg)

 

N/D

Melting Point

 

     

VOC Content (% by weight)

 

N/D

Evaporation Rate (Butyl Acetate=1)

 

>1.0*

Solubility in Water

 

Soluble*

pH

 

N/D

Appearance and Odor— White cloth impregnated with a clear yellow liquid with alcohol odor.

VOC (% by weight)

 

60.0-70.0

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Extremely Flammable

54ºF* (Close cup)

N/A

N/A

Extinguishing Media –Water, foam, carbon dioxide, dry chemical.

Special Fire Fighting Procedures – Cool fire exposed containers with water fog.  Firefighters should be equipped with full protective gear including self-contained breathing apparatus.

Unusual Fire and Explosion Hazards – Solvent vapors may cause flash back.

 

*Tested using the liquid component of the towelette


Page 2 of 2 for B4150 Protector Tubs

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid

Excess heat and open flame

Hazardous

Polymerization

May Occur

Stable

X

Will Not Occur

X

Incompatibility (Materials to Avoid) – Strong oxidizing agents.

Hazardous Decomposition or Byproducts – Thermal decomposition may produce oxides of carbon.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic)

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

None

None

None

Signs and Symptoms of Exposure:

Eyes—Irritation

Skin—None under normal use.

Inhalation— Drowsiness, irritation.

Ingestion— Not an expected route of exposure.

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures. 

Eyes—Flush eyes and under eyelids with plenty of cool water for at least 15 minutes.  If irritation persists, obtain medical attention.

Skin—Wash with soap and water.  If irritation persists, obtain medical attention.

Inhalation—Remove person to fresh air.

Ingestion—Contact physician or poison control center immediately.  Give affected person 1 to 2 glasses of water.  Never give anything by mouth to an unconscious person.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Ventilate area and remove all sources of ignition.  Contain spill.  Soak up spilled material with inert absorbent material and place in a properly marked closed container for proper disposal. 

Waste Disposal Method – Consult local environmental authorities.

Precautions to be Taken in Handling and Storing –

Store in a cool, dry place away from heat or open flame.  Keep container tightly closed when not in use.

Other Precautions – KEEP OUT OF REACH OF CHILDREN

Section VIII – Control Measures

Respiratory Protection (Specify Type) – Use with adequate ventilation.  If recommended exposures limits are exceeded wear a NIOSH approved respirator, following manufacturer’s recommendations.

Ventilation

Local Exhaust

Recommended

Special

 

Mechanical (General)

Not Required

Other

 

Protective Gloves –

None needed under normal use

Eye Protection –.

None needed under normal use

Other protective Clothing or Equipment – None

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.