Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 2 REACTIVITY 1

FLAMMABILITY 0 PERSONAL PROTECTION N/A

Identity (As Used On Label and List)

Q2058/G3004 Mega Power

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

02-2011

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Optional)

2-Butoxyethanol

111-76-2

50 ppm

20 ppm

4-8

Dodecylbenzene Sulfonic Acid

27176-87-0

N/E

2-6

Sodium Hydroxide

1310-73-2

2mg/m3

5-10

Disodium Trioxosilicate, Pentahydrate

6834-92-0

N/E

2-5

Non-Hazardous Components

Nonylphenol Ethoxylate

9016-45-9

N/E

2-6

This product subject to the reporting requiring under SARA Title III Section 313.

Section III - Physical Chemical Characteristics

Boiling Point

>212ºF

Specific Gravity (H₂O = 1)

1.05

Vapor Pressure (mmHg)

N/A

Melting Point

N/A

Vapor Density (Air=1)

(Heaver than air)

Evaporation Rate (Butyl Acetate = 1)

(slower than water)

Solubility in Water

100%

12.0 - 13.0

Appearance & Odor—

Clear/Yellow-Green liquid with butyl odor.

VOC%

Concentrate

Section IV – Fire and Explosion Hazard Data

Flammability

Flammable Limits

LEL

UEL

None

Extinguishing Media – Water, carbon dioxide, dry chemical, foam.

Special Fire Fighting Procedures –Avoid breathing of vapors. Apply water spray to cool fire-exposed containers and structures. Use water spray to disperse vapors. Use self-contained breathing apparatus (SCBA) or NIOSH approved respirator and protective clothing.

Unusual Fire and Explosion Hazards – If material is released, area will become slippery.

Page 2 of 2 for Q2058/G3004 Mega Power

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

Extreme heat or flame. Avoid contact with soft metals. Keep from freezing

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) – None

Hazardous Thermal Decomposition or Byproducts – CO, CO2, Nitrogen.

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic) –

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

Signs and Symptoms of Exposure:

Eyes— Product is a severe irritant on contact. May cause corneal damage and/or blindness.

Skin— May cause irritation or burns on prolonged contact.

Inhalation— Moderate irritant to the respiratory tract. May cause coughing, headache, nausea and vomiting.

Ingestion —May cause damage to mucous membranes of the mouth, esophagus, stomach and bronchial tract.

Medical Conditions Generally Aggravated –May cause dermatitis if skin is sensitive.

Emergency and First Aid Procedures.

Eyes—Immediately flush the eyes with large quantities of running water for a minimum of 15 minutes. Hold the eyelids apart during the flushing to ensure rinsing of the entire surface of the eyes and lids with water. DO NOT attempt to neutralize with chemical agents. Obtain medical attention as soon as possible. Oils or ointment should not be used. Continue the flushing for an additional 15 minutes if the physician is not immediately available

Skin— Immediately remove contaminated clothing. Flush all affected areas with large amounts of water for at least 15 minutes. DO NOT attempt to neutralize with chemical agents. Obtain medical advice immediately if irritation persists. Wash contaminated clothing prior to reuse.

Inhalation—Remove from contaminated atmosphere. If breathing has ceased, clear the victim’s airway and start mouth-to-mouth artificial respiration, which may be supplemented by the use of a bag-mask respirator, or a manually-trigger, oxygen supply capable of delivering 1 liter/second or more. If the victim is breathing, oxygen maybe administered from a demand-type or continuous flow inhalator, preferably with a physician’s advice. Contact a physician immediately.

Ingestion— DO NOT induce vomiting. Immediately give large quantities of water or milk, if available. If vomiting does occur, give fluids again. Never give anything by mouth to an unconscious person. Call a physician of the nearest. Poison Control Center immediately.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

To contain spilled material, dike area involved. To absorb product, use porous material such as diatomaceous earth, sand or a commercial absorbent. Using a shovel, place into leak proof containers.

Waste Disposal Method – Dispose of in accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

Store in a tightly closed container. Do not store near oxidizers, alkalies, acids and bleach. Do not mix with other chemicals. Store away from excessive heat. Do not freeze. Keep away from food stuffs. Keep out of reach of children.

Other Precautions –N/A

Section VIII – Control Measures

Respiratory Protection (Specify Type) – None needed for normal clean up. If mist or vapor may be generated, a self-contained breathing apparatus (SCBA) or NIOSH approved respirator is advised.

Ventilation

Provide adequate ventilation or use mechanical devices.

Protective Gloves –

Rubber type. Chemical resistant.

Eye Protection –

Safety splash goggles.

Other protective Clothing or Equipment – Protective clothing. Solvent resistant boots & clothing. Have clean water available for washing.

Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.