Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                             REACTIVITY                              

FLAMMABILITY                                             PERSONAL PROTECTION         

Identity (As Used On Label and List)

B4123  Glue It Fast

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date prepared

01-02-2007

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Exposure Limits

(STEL) ACGIH (TLV)

%(Opt.)

Acetone

67-64-1

1000 ppm TWA

500 ppm TWA

750 ppm

 

 

 

2400mg/m3

1186mg/m3

1782mg/m3

     

Modified Toluene Polymer

Proprietary

 

 

 

 

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

 

90-100ºC

Specific Gravity (H2O = 1)

Concentrate

Vapor Pressure (mm/Hg)

 

Melting Point

 

None

Vapor Density (Air=1)

 

Evaporation Rate (Butyl Acetate=1)

 

Solubility in Water

 

pH

 

Appearance and Odor—  Liquid with strong solvent odor.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Closed Cup

2.4ºF/132ºC

1.8

14.3

Extinguishing Media – Carbon Dioxide, foam, dry chemical

Special Fire Fighting Procedures – Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.  If involved in a fire the material decomposes to emit toxic fumes of carbon dioxide and carbon monoxide.

Unusual Fire and Explosion Hazards – May explode in fires.

 

Page 2 of 2 for B4123  Glue It Fast

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid –

Hazardous

Polymerization

May Occur

Stable

x

Will Not Occur

x

Incompatibility (Materials to Avoid) –

Hazardous Decomposition or Byproducts –

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

 

Inhalation?

 

Skin?

 

Ingestion?

 

 

Health Hazards (Acute and Chronic) –

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

No

No

No

Signs and Symptoms of Exposure:

Eyes—May cause eye irritation.

Skin—May cause skin irritation.

Inhalation— May cause irritation to nose and throat.

Ingestion— Moderately toxic by ingestion.

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures: 

Eyes—Wash out with water or saline solution for at least 15 minutes.

Skin—Flush with large quantities of water.

Inhalation—Remove to fresh air.  If person is unconscious, place in the recovery position and monitor breathing.  Apply artificial respiration only if patient is not breathing.  Seek medical attention when anyone has symptoms apparently due to swallowing or inhalation.

Ingestion— Give large quantities of water as a mouthwash.  Ensure the mouthwash is not swallowed.  If chemical has been swallowed, give about 250ml water to dilute it in the stomach.  In severe cases, seek medical attention.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled–

 

Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

 

Other Precautions –

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

 

Ventilation

Local Exhaust

 

Special

 

Mechanical (General)

 

Other

 

Protective Gloves –

Eye Protection –.

Other protective Clothing or Equipment –

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.