Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY 0

FLAMMABILITY 1 PERSONAL PROTECTION A

Identity (As Used On Label and List)

B5084 Germ-A-Way

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

02-06-2007

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended

%(Wt.)

Water

7732-18-05

None

Diethylene glycol monobutyl ether

112-34-5

None

Tetrasodium ethylenediaminetetra acetate

64-02-08

None

Alkyl dimethyl benzyl ammonium chloride

68391-01-05

None

(C12-18)

Alkyl dimethyl ethyl benzyl ammonium chloride

85409-43-0

None

(68% C12, 32% C14)

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III

Section 313

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

212ºF

Specific Gravity (H₂O = 1)

Concentrate

1.009

Vapor Pressure (mm/hg)

No Data

Melting Point

No Data

Vapor Density (Air=1)

Evaporation Rate (Butyl Acetate = 1)

No Data

VOC (grams per Liter)

0.13

VOC (by weight)

0.01%

Solubility in Water

Soluble

11.7 +/- 0.5

Appearance and Odor—Clear colorless liquid with a lemon-lime scent impregnated on a towel.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

>201ºF (MCF)

No Data

Extinguishing Media –Not usually necessary as this product does not readily support combustion. Use extinguishing agent appropriate for fire’s fuel source. (i.e.-Carbon dioxide, foam, dry chemical.)

Special Fire Fighting Procedures –Keep containers cool and vapors down with water spray. Prevent runoff from entering sewers and public waterways. Wear self-contained breathing apparatus (SCBA) in chemical fires.

Unusual Fire and Explosion Hazards –None known.

Page 2 of 2 for B5084 Germ-A-Way

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid –

N/A

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) – Strong oxidizers.

Hazardous Products of combustion- Carbon dioxide, carbon monoxide, various hydrocarbons, oxides of nitrogen, ammonia and soot.

Hazardous Decomposition or Byproducts –Upon decomposition, this product may yield oxides of nitrogen and ammonia.

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic) –

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

N/A

Signs and Symptoms of Exposure:

Eyes—May cause irritation, redness, tearing or burning in eyes.

Skin—May cause irritation, redness, drying or cracking of skin.

Inhalation—May cause irritation of the throat or stomach, nausea.

Ingestion—May cause diarrhea if swallowed.

Medical Conditions Generally Aggravated –Pre-existing skin conditions such as dermatitis may be adversely affected.

Emergency and First Aid Procedures.

Eyes— Immediately flush with plenty of water for a least 15 minutes lifting eyelids to insure complete removal. If irritation persists, get medical attention.

Skin—Flush with plenty of water for at least 15 minutes while removing contaminated clothing. If irritation arises and persists, call a physician. Lauder contaminated clothing and shoes before reuse.

Inhalation— Get to fresh air. If breathing has stopped, qualified personnel should administer artificial respiration. If breathing is difficult give oxygen.

Ingestion—Do not induce vomiting unless directed by a physician. Never give anything by mouth to an unconscious person. If ingestion of a large amount does occur, call a physician or poison control center immediately.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Small Spill— Wipe up small releases with a dry absorbent cloth or other absorbent material.

Large Spill— Ventilate area and block traffic. Absorb liquid with vermiculite, absorbent cloth, or other absorbent material. Prevent material from entering sewers or drains. Transfer contaminated material into suitable container for proper disposal.

Waste Disposal Method – Dispose of in accordance with all applicable local, state, and federal regulations.

Precautions to be Taken in Handling and Storing –

Do not allow towel contact with eyes. Avoid contact with skin. Avoid breathing vapors or mists of the product. Wash thoroughly after handling. Do not contaminate water, food or feed by use or storage. Follow label directions carefully. Store in a cool, dry well ventilated area. Avoid freezing or excessive heat. Keep container tightly sealed when not in use.

Other Precautions –KEEP OUT OF REACH OF CHILDREN

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

Not usually necessary. Use with adequate ventilation. Use NIOSH/MSHA approved respirator if PEL’s or TLV are exceeded.

Ventilation

Local Exhaust

Not usually necessary

Special

Mechanical (General)

Other

Protective Gloves –

If prolonged contact is possible use impervious gloves.

Eye Protection –

If direct contact is possible wear approved safety glasses (ANSI Z87)

Other protective Clothing or Equipment –N/A

Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.