Material Safety Data Sheet May be used to Comply with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200. Standard must be consulted for specific requirements

HMIS

HEALTH 2 REACTIVITY 1

FLAMMABILITY 0 PERSONAL PROTECTION B

Identity (As Used On Label and List) Q2001 Cannon

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for: OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number: 1-800-424-9300

Address (Number, Street, City, State, and Zip Code) 101 Grobric Ct #1

Telephone Number for Information: 1-800-571-7347

Fairfield, CA 94534

Date Prepared 12-09-2006

Signature of Prepare (Optional) REGULATORY DEPT.

Section II – Hazardous Ingredients / Identity Information

Hazardous Components (Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits Recommended.

%(Opt.)

Sodium Hydroxide

1310-73-2

2mg

2mg

None

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III – Physical Chemical Characteristics

Boiling Point

212ºF

Specific Gravity (H2O = 1) Concentrate

1.52

Vapor Pressure

N/A

Melting Point

Vapor Density

N/A

Evaporation Rate (Butyl Acetate = 1)

N/D

% Volatiles

50%

Ph (Concentrate)

14.00

Solubility in Water

Complete

Ph (1% Solution)

13.20

Appearance and Odor—Clear dark red liquid with a bland odor.

VOC%

0

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Cleveland Closed Cup

None

N/A

N/A

Extinguishing Media – Water, sand,CO2, dry foam, halon.

Special Fire Fighting Procedures – This product will not burn or support combustion.

Unusual Fire and Explosion Hazards – None

Page 2 of 2 for Q2001 Cannon

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid – None Known

Hazardous Polymerization

May Occur

Stable

X

Will Not Occur

X

Incompatibility (Materials to Avoid) – Strong acids and contact with aluminum, tin, lead, or zinc.

Hazardous Decomposition or Byproducts – Hydrogen gas

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Inhalation?

Skin?

Ingestion?

Health Hazards (Acute and Chronic) – Acute: Eyes and skin irritation upon direct contact Chronic: None known

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

Signs and Symptoms of Exposure: Eyes— When this product comes in contact with eyes or eyelids it may cause severe irritation with corneal injury which may result in permanent impairment of vision or even blindness. Skin—When the concentrated form of this product comes in contact with the skin it may cause severe irritation and/or damage to the skin. There is also the possibility of defatting of the skin due to the removal of the skins naturals oils. Inhalation— Fumes, vapors and especially mists from this product are considered extremely corrosive to the nose throat and mucous membrane. Ingestion— When concentrated solutions of this product are swallowed severe burns to mucous membranes of the mouth, throat, esophagus, and stomach will result.

Medical Conditions Generally Aggravated – Pre-existing eye or skin conditions will be aggravated by contact.

Emergency and First Aid Procedures. Eyes— If this product comes in contact with eyes; flush eyes with clean water for 30 minutes and consult a physician if irritation persists. Skin—Flush exposed area with cool water for 15 minutes. Consult a physician if irritation persists. Inhalation— Remove to clean atmosphere and consult physician immediately. Ingestion—Do not induce vomiting. Have patient drink large amounts of milk or plain water. Consult a physician immediately.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –. Small Spills/Leaks— Flush are with water to an industrial sewer line. Large Spills/Leaks— Contain spill with dikes of absorbent materials such as clay, sand, or vermiculate. This material is considered hazardous in concentrated form.

Waste Disposal Method – All Hazardous waste must be solidified and disposed of in an EPA approved class one disposal facility. When disposing of chemicals contact local, state and federal environmental agencies to fully understand the necessary regulations governing the disposal of chemicals wastes.

Precautions to be Taken in Handling and Storing – Keep containers closed when not being used. Do not store near food.

Other Precautions – This product may contain a trace amount of one or more of the chemicals on the California list of known carcinogens or substances known to cause birth defects or other reproductive harm. These are not added to the product but occur naturally in the raw materials or processing equipment.

Section VIII – Control Measures

Respiratory Protection (Specify Type) – Not normally required

Ventilation

Local Exhaust

Normal

Special

None

Mechanical (General)

Other

None

Protective Gloves –Recommended when handling any chemicals proper protection for skin and hands should be worn.

Eye Protection – Recommended when handling any chemical product that proper protection should be worn.

Other protective Clothing or Equipment – Not Required

DOT Classification — Consumer Commodity—ORM D

Work/Hygienic Practices – Observe good personal hygiene. Wash hands before eating, avoid inhalation or ingestion Remove contaminated clothing promptly.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all’ liability from reliance thereon.