Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

Consulted for specific requirements

HMIS

HEALTH                                                   1        REACTIVITY                               0

FLAMMABILITY                                     0      PERSONAL PROTECTION          B

Identity (As Used On Label and List)

B4027W  Grease It White

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

02-06-2008

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

 

Other Limits

%(Wt.)

Zinc Oxide

1314-13-2

N/D

N/D

     

 

USP White mineral Oil

8042-47-5

5mg/m3

5mg/m3

 

 

 

 

For oil mist

For oil mist

 

 

Calcium Carbonate

1317-65-3

5mg/m3

5mg/m3

 

 

 

 

Dust

Dust

 

 

Aluminum Soap

68647-58-5

N/E

N/E

 

 

Polyisobutylene

9003-27-4

5mg/m3

5mg/m3

 

 

 

 

For oil mist

For oil mist

 

 

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

 

N/A

Specific Gravity (H2O = 1)

Concentrate

.89

Vapor Pressure (mm/hg)

 

N/A

Melting Point

 

N/A

Vapor Density (Air=1)

 

N/D

Evaporation Rate (Butyl Acetate = 1)

 

N/A

Solubility in Water

 

Negligible

Water Reactive

 

N/D

Appearance and Odor—White gel-with oil odor.

VOC%

 

<5%

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Non Flammable

N/A

N/D

N/D

Extinguishing Media – Dry chemical, carbon dioxide, foam.

Special Fire Fighting Procedures –use water spray only to cool containers.  Water stream may spread fire.  Firefighters may need to wear self-contained breathing apparatus.

Unusual Fire and Explosion Hazards –Will not flash spontaneously; may ignite if exposed to open flame.  Do not cut or weld on containers..

 


Page 2 of 2 for B4027W Grease It White

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid

None

Hazardous

Polymerization

May Occur

Stable

X

Will Not Occur

X

Incompatibility (Materials to Avoid) – Strong oxidizing.

Hazardous Decomposition or Byproducts –Oxides of carbon, aluminum, calcium and zinc.

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic)

See Below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

N/L

N/L

N/L

Signs and Symptoms of Exposure:

Eyes— May cause eye irritation by abrasion based on data form components.

Skin— May cause skin irritation by abrasion based on data from components.  Primary hazard associated with grease in high pressure gun.  If injected under the skin, necrosis could result.

Inhalation— Not expected to be acutely toxic by inhalation based on data from components.  Breathing petroleum oil mist at concentration in air that exceeds the recommended exposure standard can cause respiratory irritation or discomfort.

Ingestion— May cause irritation, nausea or diarrhea.  Possible aspiration hazard.

Medical Conditions Generally Aggravated –None known.

Emergency and First Aid Procedures. 

Eyes—Immediately flush eyes with water for a minimum of 15 minutes occasionally lifting lower and upper lids.  If film or irritation persists, seek medical attention.

Skin—Wash exposed portions with soap and water.  If injected under the skin, get medical attention immediately.  Launder soiled clothing before reuse.

Inhalation—If respiratory discomfort or irritation occurs, move person to fresh air.  If breathing has stopped give artificial respiration and get medical attention.

Ingestion—DO NOT INDUCE VOMITING.  Drink large quantities of water.  Get immediate medical attention.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Absorb on fire resistant absorbent.  Place in properly labeled non-leaking containers for proper disposal.

Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

Keep away from flames, sparks or hot surfaces.  Keep containers closed.

Other Precautions –KEEP OUT OF REACH OF CHILDREN.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

Organic vapor respirator.  Firefighters should wear self contained positive pressure breathing apparatus.

Ventilation

Local Exhaust

Adequate

Special

 

Mechanical (General)

Adequate

Other

 

Protective Gloves –

Nitrile or neoprene, oil resistant.

Eye Protection –

Safety glasses or chemical goggles.

Other protective Clothing or Equipment – Oil resistant apron.

Work/Hygienic Practices – Observe good hygiene.  Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.