Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

consulted for specific requirements

HMIS

HEALTH                                                   2              REACTIVITY                                     0

FLAMMABILITY                                     1              PERSONAL PROTECTION              B

Identity (As Used On Label and List)

B4010  Formula 86’D

Note:  Blank spaces are not permitted.  If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

 

Fairfield, CA 94534

Date Prepared

07-28-2009

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

Caustic Soda Beads

1310-73-2

5 ppm

5 ppm

     

 

Sodium Nitrate

7631-99-4

100 ppm

100 ppm

 

     

 

 

 

 

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

 

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

Concentrate – Initial

N/A

Specific Gravity (H2O = 1)

Concentrate

N/A

Vapor Pressure

 

N/A

Melting Point

 

N/D

Vapor Density (Air=1)

 

N/A

Evaporation Rate (H2O=1)

 

0

Solubility in Water

 

Complete

pH (1% Solution)

 

13.2

Appearance and Odor

Red granular solid with a bland odor

% Volatiles

 

N/A

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

None (Cleveland Closed Cup)

None

None

None

Extinguishing Media – Water, dry foam, carbon dioxide, sand.

Special Fire Fighting Procedures –None

Unusual Fire and Explosion Hazards – None

 


Page 2 of 2 for B4010 Formula 86’D

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid

Keep away from high heat

Hazardous

Polymerization

May Occur

Stable

x

Will Not Occur

x

Incompatibility (Materials to Avoid) – N/A

Hazardous Decomposition or Byproducts –N/A

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

 

Inhalation

Skin?

Ingestion?

Health Hazards (Acute and Chronic)

See below

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

 

Signs and Symptoms of Exposure:

Eyes— When this product comes in contact with the eyes or eyelids it may cause severe irritation and/or damage to the eyes and immediate areas.

Skin—When the concentrated form of this product comes in contact with the skin it may cause severe irritation and/or damage to the skin.  There is also the possibility of defatting of the skin due to the removal of the skins natural oils.

Ingestion—When concentrated solutions of this product are swallowed severe discomfort and/or damage of the stomach and intestinal tract may occur.

Inhalation—Fumes from this product are generally considered non-toxic, and pose no safety or health threat.

Medical Conditions Generally Aggravated –None known.

Emergency and First Aid Procedures- 

Eyes— Flush eyes with luke warm water for 30 minutes and consult a physician if irritation persists.

Skin—Flush all affected areas with large amount of running water for at least 15 minutes.  Consult a physician if irritation persists.

Ingestion— DO NOT induce vomiting.  Have patient drink large amounts of milk or plain water.  Consult a physician immediately.

Inhalation—Remove to fresh air. Consult a physician.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –

Small Spills— Flush area with water to an industrial sewer line.

Large Spills— Contain spill with dikes of absorbent materials such as clay, sand, or vermiculate.  This material is considered hazardous in concentrated form.

Waste Disposal Method – All hazardous waste must be solidified and disposed of in an EPA approved class one disposal facility.  When disposing of chemicals contact local, state, and federal environmental agencies to fully understand the necessary regulations governing the disposal of chemical wastes.

Precautions to be Taken in Handling and Storing –

Keep away from high heat and observe proper housekeeping procedures.  Do not mix chemicals unless instructed by qualified personnel.

Other Precautions –KEEP OUT OF REACH OF CHILDREN.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

None required.

Ventilation

Local Exhaust

Adequate

Special

     

Mechanical (General)

 

Other

     

Protective Gloves –

When handling any chemical product it is recommended that proper protection of the skin and hands be worn.

Eye Protection –

When handling any chemical product it is recommended that proper protection of the eyes be worn.

Other protective Clothing or Equipment – None.

Work/Hygienic Practices - Normal.  Wash thoroughly before eating, drinking, smoking, using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.