Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

 29 CFR 1910.1200.  Standard must be

consulted for specific requirements

HMIS

HEALTH                                                   1              REACTIVITY                                      

FLAMMABILITY                                                   PERSONAL PROTECTION              B

Identity (As Used On Label and List)

B4055  Dye Away

Note:  Blank spaces are not permitted.  If any item is not applicable, or no  information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

01-19-2005

 

 

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

None

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

* This product contains perchloroethylene (syn. Tetrachloroethylene) which is listed and may require reporting under SARA

Title III Sec. 313 if used over the threshold reporting quantity.  This information must be included in all MSDSs that are

copied and distributed for this material.

 

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

 

Section III - Physical Chemical Characteristics

Boiling Point

Concentrate – Initial

212ΊF

Specific Gravity (H2O = 1)

Concentrate

1.01

Vapor Pressure (mm Hg)

 

ND

Melting Point

 

NA

Vapor Density

 

<> 

Evaporation Rate (Butyl Acetate = 1)

 

>1

Solubility in Water

 

Complete

pH

 


Appearance and Odor— Clear liquid with bland color.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

None

N/A

N/A

N/A

Extinguishing Media – N/A

Special Fire Fighting Procedures –Do not enter fire space without proper protective equipment including NIOSH approved self contained breathing apparatus

Explosion Hazards - None

 


Page 2 of 2 for B4055 Dye Away

Section V – Reactivity Data

Stability

 

Unstable

Conditions to Avoid –

N/A

Stable

x

Incompatibility (Materials to Avoid) - Oxidizers or strong acids

Hazardous Decomposition or Byproducts –Carbon dioxide.

Hazardous

Polymerization

May Occur

Conditions to Avoid –

N/A

Will Not Occur

x

Section VI – Health Hazard Data

Route(s) of Entry:

 

Eyes?

 

Inhalation?

Skin?

Ingestion?

Health Hazards (Acute and Chronic) –

Unknown

Carcinogenicity:

NT?

IARC Monographs?

OSHA Regulated?

 

No

No

No

Signs and Symptoms of Exposure: 

Eyes— Severe irritation.

Skin —Severe irritation.

Inhalation— Irritation for sensitive individuals.

Ingestion— Gastric pain and vomiting

Medical Conditions Generally Aggravated –Unknown

Emergency and First Aid Procedures: 

Eyes—Flush with clear running water for 15 minutes. Get medical attention.

Skin — Rinse skin in clear water.

Inhalation— Remove to fresh air. If breathing does not return to normal, get medical attention.

Ingestion— Immediately drink large quantities of water. Get medical attention.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –

Dilute with water and flush to sanitary sewer

Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

Keep container closed when not in use. Do not freeze.  Follows label information

Other Precautions – KEEP OUT OF THE REACH OF CHILDREN

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

For exposure above established limits (see section II) use NIOSH/MSAA approved dust/mist mask.

Ventilation

Local Exhaust

     

Special

     

Mechanical (General)

     Recommended

Other

     

Protective Gloves –

Rubber or neoprene

Eye Protection -

Chemical goggles with side shield

Other protective Clothing or Equipment –Clothing or equipment: Drenching safety shower and eye wash station

Work/Hygienic Practices - Normal.  Wash thoroughly before eating, drinking, smoking, using restrooms, etc.

 

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.