Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 1 REACTIVITY 0

FLAMMABILITY 0 PERSONAL PROTECTION

Identity (As Used On Label and List)

B4033 Brite Bath

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date prepared

07-16-2007

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components (Specific

Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

212ºF

Specific Gravity (H₂O = 1)

Concentrate

1.00

Vapor Pressure

N/D

Melting Point

N/A

Vapor Density

N/D

Evaporation Rate (Butyl Acetate = 1)

N/D

Solubility in Water

Dispersible

Appearance and Odor—Milky white liquid with pleasant almond odor.

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

>200ºF T.C.C

N/A

Extinguishing Media – Carbon dioxide or dry chemical on small fires. Foam (alcohol, polymer or ordinary) and water spray for large fires.

Special Fire Fighting Procedures –Fire fighter must wear NIOSH/MSHA approved pressure demand self-contained breathing apparatus with full-face piece for possible exposure to hazardous gases.

Unusual Fire and Explosion Hazards – None known

Page 2 of 2 for B4033 Brite Bath

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid–

None known

Stable

Incompatibility (Materials to Avoid) – Strong oxidizing material can cause a reaction.

Hazardous Decomposition or Byproducts –Thermal decomposition or burning may produce carbon dioxide and or silicone oxides.

Hazardous

Polymerization

May Occur

Conditions to Avoid –

None

Will Not Occur

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Yes

Inhalation?

Yes

Skin?

Yes

Ingestion?

Yes

Health Hazards (Acute and Chronic) –

Acute Contact with skin or eyes may cause temporary irritation.

Chronic None Determined

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

Signs and symptoms of Exposure:

Eye and skin irritation

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures.

Eyes—Wash thoroughly with water for at least 15 minutes. If irritation persists, get medical attention.

Skin—Wash with soap and water if irritation develops, call a physician.

Ingestion—Call a physician

Inhalation—Remove to fresh air: if breathing stops. Give artificial respiration.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Use absorbent material to collect and contain for disposal. Contain large spills and pump into suitable tank. Wash area with suitable detergent and rinse thoroughly.

Waste Disposal Method – Dispose of residue in accordance with federal, state and local regulations.

Precautions to be Taken in Handling and Storing –

Store in will ventilated areas at temperatures above 32ºF and below 120ºF

Other Precautions –KEEP OUT OF REACH OF CHILDREN.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

Canister type GMA (mine Safety Appliance Co.) if necessary.

Ventilation

Local Exhaust

Not necessary

Special

Not Determined

Mechanical (General)

Recommended

Other

Not Determined

Protective Gloves –

Rubber or PVC

Eye Protection –

Goggles

Other protective Clothing or Equipment – Boots, apron or chemical suits should be used when necessary to prevent skin contact.

Work/Hygienic Practices – Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.