Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

Consulted for specific requirements

HMIS

HEALTH 0 REACTIVITY 1

FLAMMABILITY 0 PERSONAL PROTECTION A

Identity (As Used On Label and List)

A1109 Bacinator

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

01-16-2007

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Ingredients / Identity Information

Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

%(Wt.)

Propane/N-Butane

68476-86-8

1000 ppm

600ppm

N/A

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

N/A

Specific Gravity (H₂O = 1)

Concentrate

1.01

Vapor Pressure

17.5

Melting Point

N/A

Vapor Density (Air=1)

Evaporation Rate (Butyl Acetate = 1)

<0.01

Solubility in Water

100 %

Appearance and Odor—Spring mist

VOC % Content

6 %

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-3065)

Flammable Limits

LEL

UEL

Non Flammable

N/A

Extinguishing Media – Standard chemical fire extinguisher.

Special Fire Fighting Procedures –Wear self-contained breathing apparatus when indicated.

Unusual Fire and Explosion Hazards – Contents under pressure. Keep away from heat, sparks or open flame. Exposure to temperatures above 120ºF may cause can to burst.

Page 2 of 2 for A1109 Bacinator

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid – Temperatures above 120ºF, hot surfaces

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) – None Known

Hazardous Decomposition or Byproducts – None Known

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

Yes

Inhalation?

No

Skin?

No

Ingestion?

Yes

Health Hazards (Acute and Chronic) –

Eyes— Irritation

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

No

Signs and Symptoms of Exposure:

See above

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures.

Eyes—Rinse thoroughly with water. If irritation persists contact physician.

Ingestion—Call physician.

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled.

Wash up spill using absorbent clay material or mop. Wash area with soap and water. Dispose of residue in accordance with federal, state and local guidelines.

Waste Disposal Method – Dispose of in a sanitary landfill, offer can for recycling. Do not reuse container wrap container and place in trash container.

Precautions to be Taken in Handling and Storing –

Store in a cool dry area.

Other Precautions – KEEP OUT OF REACH OF CHILDREN.

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

N/A

Ventilation

Local Exhaust

N/A

Special

N/A

Mechanical (General)

N/A

Other

N/A

Protective Gloves –

N/A

Eye Protection –

Safety glasses are recommended when using chemical products.

Other protective Clothing or Equipment – N/A

Work/Hygienic Practices –Wash hands after use. Observe good hygiene. Wash hands thoroughly after eating, drinking, and using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.