Material Safety Data Sheet

May be used to Comply with OSHA’s

Hazard Communication Standard,

29 CFR 1910.1200. Standard must be

consulted for specific requirements

HMIS

HEALTH 0 REACTIVITY 0

FLAMMABILITY 0 PERSONAL PROTECTION 0

Identity (As Used On Label and List)

B4102/B4103 Absorbent Socks

Note: Blank spaces are not permitted. If any item is not applicable, or no information is available, the space must be marked to indicate that.

Section I

Manufactured for:

OMEGA INDUSTRIAL SUPPLY, INC

Emergency Telephone Number:

1-800-424-9300

Address (Number, Street, City, State, and Zip Code)

101 Grobric Ct #1

Telephone Number for Information:

1-800-571-7347

Fairfield, CA 94534

Date Prepared

07-01-2004

Signature of Prepare (Optional)

REGULATORY DEPT.

Section II - Hazardous Ingredients / Identity Information

Hazardous Components

(Specific Chemical Identity, Common Name(s))

CAS No.

OSHA PEL

ACGIH-TLV

Other Limits

Recommended.

%(Opt.)

None

This product is not known to contain any compounds listed and in quantities requiring reporting under SARA Title III Section 313.

Any substance listed as hazardous by the State of California, Florida, Illinois, Michigan, New Jersey, Ohio, Pennsylvania or

Texas is described above if known present in regulated concentrations.

Section III - Physical Chemical Characteristics

Boiling Point

N/A

Specific Gravity (H₂O = 1)

0.88—0.92

Vapor Pressure

N/A

Melting Point

>160°C

Vapor Density

N/A

Evaporation Rate (Butyl Acetate = 1)

N/A

Solubility in Water

Insoluble

Appearance and Odor— Gray and virtually odor free

VOC%

N/A

Section IV – Fire and Explosion Hazard Data

USA Flame Projection Test (ASTM D-93)

Flammable Limits

LEL

UEL

>329°C (Pensky-Martens Closed Cup)

N/A

Extinguishing Media – Water, foam, CO2, dry chemical

Special Fire Fighting Procedures – Standard procedure for Class A fires

Unusual Fire and Explosion Hazards – Some carbon monoxide formation is possible under oxygen lean conditions

Page 2 of 2 for B4102/B4103 Absorbent Socks

Section V – Reactivity Data

Stability

Unstable

Conditions to Avoid-

N/A

Hazardous

Polymerization

May Occur

Stable

Will Not Occur

Incompatibility (Materials to Avoid) –Hot or concentrated nitric and perchloric acid, sulfuric acid or 98% sulfuric acid at 60ºC or above.

Hazardous Decomposition or Byproducts –N/A

Section VI – Health Hazard Data

Route(s) of Entry:

Eyes?

N/A

Inhalation?

N/A

Skin?

N/A

Ingestion?

N/A

Health Hazards (Acute and Chronic) –

No Special Procedures Required

Carcinogenicity:

NTP?

IARC Monographs?

OSHA Regulated?

Signs and symptoms of Exposure:

None Known

Medical Conditions Generally Aggravated –None Known

Emergency and First Aid Procedures.

None Known

Section VII – Precautions For Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled –.

Collect and deposit in a suitable container away from heat and ignition.

Waste Disposal Method – Dispose of in a sanitary landfill or incinerate in compliance with state, federal, and local regulations.

Precautions to be Taken in Handling and Storing –

None Known

Other Precautions – None Known

Section VIII – Control Measures

Respiratory Protection (Specify Type) –

None Known

Ventilation

Local Exhaust

N/A

Special

Mechanical (General)

N/A

Other

Protective Gloves –

None Known

Eye Protection –

None Known

Other protective Clothing or Equipment – None Known

Work/Hygienic Practices - Normal. Wash thoroughly before eating, drinking, smoking, using restrooms, etc.

While the information and recommendations set forth herein are believed to be accurate as of the date hereon Omega Industrial Supply Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon.