Back to Catalog Main Page

Cleaners & Degreasers   Disinfectants & Deodorizers   Drain & Sewer   Floor & Carpet   Graffiti   Grounds & Landscape 
 Hand Cleaners & Personal Care   HVAC & Water Treatment   Insecticides   Lubricants   Paints, Patches, Coatings & Adhesives
Roofing   Solvents & Electrical   THE GREEN LINE   Transportation   Water & Boiler Treatment   Wipes   Xtras

Picture of AFS

AFS

A.F.S. is a polymer fortified asphalt driveway coating designed for application over all blacktop surfaces in sound condition. This easy-to-stir rubberized product will minimize the damaging effects of weather on asphalt driveways. A.F.S.'s heavy-bodied formulation fills and seals hairline cracks up to 1/8" wide. It provides an attractive durable finish, and slip resistance on sloped surfaces.

Packaging: Bulk

MSDS    TECH SHEET

Picture of Omega Asphalt Patch

ASPHALT PATCH

This ready-mixed compound can be applied to holes and depressions in any solid base, such as asphalt, concrete, brick, stone or wood. It is made from a combination of hard aggregate, asphalt, resins and wetting agents to match original blacktop surfaces. Tamped into place, it is ready for traffic at once. ASPHALT PATCH can be applied to either wet or dry surfaces in a temperature range from hot to sub-freezing.

Packaging: Bulk

MSDS    TECH SHEET

Picture of C patch

C PATCH

C PATCH is a concrete and mortar filler and sealer that is designed to repair cracks and holes in concrete, masonry and mortar. Provides a water tight seal and is resistant to oil, grease, gasoline, and salt water. C PATCH will adhere to concrete, cinder block, mortar, brick, and stone. It is ideal for sealing and patching driveways, sidewalks, warehouse floors and other concrete surfaces.

Packaging: Bulk

MSDS    TECH SHEET

picture of Concreteman

CONCRETEMAN

This handy, ready to use concrete repair is designed for sealing small holes and patching chips in concrete, including wall tiles, lawn ornaments and statues. CONCRETEMAN can be drilled, tapped, filed, sawed, or painted when dry. This epoxy putty can also be used under water and has a cure time of only 4 to 7 minutes for quick fixes.

Packaging: Putty Tubes

MSDS    TECH SHEET

picture of Lift Out

LIFT OUT

LIFT OUT is a heavy duty emulsifier and degreaser that removes heavy soils and stains, old paint, decals, adhesives, inks, and waxes from many surfaces. LIFT OUT is also a very effective graffiti remover that is powerful enough to remove graffiti from concrete and brick surfaces. LIFT OUT works quickly by penetrating into soils, grease, paints, and oil to lift them from most surfaces.

Packaging: Bulk

MSDS    TECH SHEET

picture of Mega Power

MEGA POWER   Earth symbol-environmentally preferred product

This is a highly concentrated, extremely powerful grease fighter that will quickly clean the toughest grime and oil deposits on asphalt without breaking down it’s sealer, making it the ideal cleaner for parking lots and driveways. Different dilution ratios allow MEGA POWER to be very versatile, making it a great cleaner for concrete and other surfaces as well. The formula for this product is non-flammable, non-toxic, non-corrosive and entirely biodegradable.

Packaging: Gallons, Bulk

MSDS    TECH SHEET

picture of Paver's Friend

PAVER'S FRIEND   Earth symbol-environmentally preferred product

PAVER’S FRIEND is water rinseable, biodegradable, has very low VOC’s, and is non-toxic. Use on truck beds, aprons, wands, emulsion tanks, hoppers, chains, conveyors, rollers, tires, and in tool dip buckets. PAVER’S FRIEND can be used before any paving job as a release agent and after as a cleaner. When used before paving, surfaces will rinse clean with water.

Packaging: Bulk

MSDS    TECH SHEET

picture of PDS

P.D.S.

P.D.S. is ideal for preventing moisture penetration and freeze/thaw surface attack. It is formulated for filling cracks ½" wide or smaller in any blacktop or concrete surface. It dries to a black, durable, elastomeric seal, and P.D.S. provides a crack-free surface prior to applying Omega driveway sealers.

Packaging: Pourable Jug

MSDS    TECH SHEET

picture of Premium Coating

PREMIUM COATING

An odorless, premium quality, fast drying, epoxy modified acrylic latex floor enamel. Use on interior and exterior surfaces of wood, concrete (new or old) and previously painted wood and concrete floors. Suitable for breezeways, decks, porches, steps, garages, basements and light industrial applications. PREMIUM COATING cures to a tough, durable film suitable for foot traffic within 24 hours.

Packaging: Bulk

MSDS    TECH SHEET

Q.D.S. QUICK DRY SEALER

Quick drying Polyurethane sealer. This product performs the functions of a super binder, filler and curing membrane all in one. Unlike most other products on the market, this sealer can be used inside or outside without discoloration. Q.D.S. is recommended for use on old or new concrete floors, terrazzo, outside exposed aggregate or any masonry surface.

Packaging: Bulk

MSDS    TECH SHEET

Q&E PATCH

Q&E is a latex type concrete floor patch. It contains silicones and liquid vinyl for a water-resistant finish. It is the ideal product for smoothing rough concrete, masonry, brick and stone. Easily applied with a trowel, Q&E quickly transforms unsightly cracked and pitted finishes to a smooth, safer, waterproofed surface.

Packaging: Bulk

MSDS    TECH SHEET

picture of Super Patch

SUPER PATCH

SUPER PATCH is an easy-to-use epoxy product for repair and resurfacing of concrete. Great when fast repairs are needed in high traffic areas. SUPER PATCH is a one-step process with a fast set-up and cure time that significantly reduces or eliminates the need for down time. Can also be used as patching in freezers and cold storage areas, as mortar to repair loose bricks or blocks, and as a general cement adhesive. SUPER PATCH is many times stronger and more durable than concrete.

Packaging: Pail

MSDS    TECH SHEET

picture of Tar Away

TAR AWAY

TAR AWAY is a specially formulated compound for the fast, easy and economical removal of tar, grease, oil and sludge from municipal and construction equipment and oil tankers. Emulsifies asphalt, dirt and baked on oils so that they can be washed off easily with water. Equipment looks better and lasts longer when cleaned with TAR AWAY.

Packaging: Bulk

MSDS    TECH SHEET

picture of Traffic Lines Paint

TRAFFIC LINES

A premium quality 100% acrylic traffic line and curb marking paint with high visibility, easy application, and made with the finest raw materials. The pigments are non-fading and the Titanium Dioxide is non-caulking. TRAFFIC LINES will withstand hot sun, sub-zero temperatures, wind-blown dust particles, humidity and moisture. This product has been designed for painting concrete, brick, city crosswalks, highway edge lines, bridges, stop zones, storage areas, traffic signs, streets and parking lots.

Packaging: Bulk

MSDS    TECH SHEET

[Catalog Main] [Catalog Index] [Next] [Previous]

[ back to the top ]